What is NDT? Non-destructive testing in oil and gas
NDT finds cracks, corrosion, and wall loss without cutting equipment open. What the main methods do, and why the record behind the test is what makes a result usable.
NDT is non-destructive testing. It is a group of inspection methods used to find cracks, corrosion, wall loss, and other flaws in metal and welds without cutting the equipment open or taking it out of service for good. A pipe, vessel, or tank that has been tested can go back to work. A part destroyed by the test cannot.
That is the whole distinction from destructive testing. A destructive test learns about a material by breaking a sample of it. NDT learns about the actual equipment, in place, and leaves it usable. In oil and gas, where the equipment is a pressure vessel, a run of piping, or a storage tank that has to keep operating, that distinction is why NDT exists.
You will also see the same work called NDE (non-destructive examination) and NDI (non-destructive inspection). The terms overlap in ordinary use. The method, the procedure, and the person are what matter. The abbreviation on the report is the least important part.
SpecNDT does not perform these tests. It is the compliance software behind them. It keeps the record that shows who was qualified to test, which procedure revision they followed, and which asset the result belongs to. That record is why the second half of this article exists. A test result nobody can trace is hard to use later.
How non-destructive testing works
Every NDT method does the same three things in a different way. It puts something at the material, such as sound, radiation, a magnetic field, or a liquid that seeps into cracks. It watches how that something behaves. Then a technician interprets the behavior as an indication, and judges the indication against an acceptance standard named in a procedure.
No method sees everything. Each one is good at a kind of flaw, in a kind of material, from a surface it can reach. Choosing the method is part of the work. So is accepting what the chosen method cannot show.
The main NDT methods
Visual testing (VT)
Looking, carefully and on purpose, often with lights, mirrors, gauges, or cameras. Visual testing finds surface damage, corrosion, misalignment, and weld flaws that break the surface. It is the oldest method and the one other methods are usually paired with. It only reports what can be seen.
Magnetic particle testing (MT)
A magnetic field is applied to a ferromagnetic part, and fine particles gather where the field leaks out at a crack. Magnetic particle testing is fast and sensitive for surface and near-surface cracks in carbon steel welds and components. It does not work on non-magnetic material, and it cannot size a flaw deep in the part.
Liquid penetrant testing (PT)
A colored or fluorescent liquid is drawn into flaws that open to the surface, then drawn back out so the flaw shows. Penetrant testing works on almost any non-porous material and needs little equipment. It finds only what reaches the surface, and the surface has to be clean enough to let it.
Ultrasonic testing (UT)
High-frequency sound is sent into the material, and the echoes are timed and read. Ultrasonic testing measures remaining wall thickness, finds corrosion and erosion, and detects and sizes flaws inside welds and metal. Thickness readings taken over years are how teams watch corrosion progress. The result depends heavily on the technician, the calibration, and the procedure.
Radiographic testing (RT)
Radiation passes through the material and records an image of what is inside, including porosity, slag, and cracks in welds. Radiographic testing leaves a permanent image another person can review later. It needs access to both sides of the part, strict safety controls, and usually more time and cost than the surface methods.
Eddy current testing (ET)
An electrical coil induces currents in a conductive material, and flaws disturb those currents. Eddy current testing is used on tubing, including heat-exchanger tubes, and for surface flaws and coating and thickness checks. It is sensitive and fast, and it is limited to conductive materials and to flaws near the surface or in thin sections.
Other methods fill narrower needs, including leak testing, acoustic emission, and guided-wave screening of piping. The six above are the ones most oil and gas teams schedule every week. A program rarely needs every method. It needs the right method for the damage it expects.
What NDT is used for in oil and gas
In oil and gas, NDT answers questions the operator has to keep answering for the life of the equipment. Is this weld sound. How much wall is left here. Has this crack grown since the last outage. Is this tank floor fit to return to service.
The work clusters in a few places:
- New construction and fabrication, where welds are examined before equipment enters service.
- In-service inspection of pressure vessels, piping, and storage tanks, including the NDT that supports inspections under API 510, API 570, and API 653.
- Corrosion monitoring, where repeated thickness readings show wall loss over time.
- Turnarounds and repairs, where findings decide what gets fixed now and what gets watched.
The asset outlives the inspection. The next inspector, often years later and often a different person, needs the earlier result on that vessel, line, or tank. That need is what turns a test into a record, and the record is where programs succeed or fail.
Who performs NDT, and what "qualified" means
NDT is done by technicians whose qualification is specific. A person is not simply "NDT certified." They are qualified for a method, at a level, under a scheme, and each of those words narrows what they may do.
In general terms, Level I technicians perform set examinations under instruction. Level II technicians set up, perform, interpret, and report. A Level III oversees the program, establishes techniques and procedures, and interprets the code and specification questions. The exact duties come from the program the employer runs, not from this summary.
Two families of program cover most of the work. Under employer-based certification, the employer certifies its own people under its written practice, commonly built from SNT-TC-1A, or under CP-189 where a client requires it. Under central certification, a body outside the employer issues the certificate, commonly under ISO 9712, through schemes such as PCN or CSWIP. Neither label is interchangeable with the other, and neither excuses the team from checking scope and expiry against the job. Vision testing, usually including near vision and color differentiation, sits on its own recurring interval alongside the method certifications.
That is why technician certification records are kept one qualification per row. "Were they qualified" means qualified for this method, at this level, on the day the work was done. How certifications expire without anyone noticing is mostly a story about that date living inside a PDF instead of in a field anyone can check.
What NDT cannot do
A clear NDT result is not a promise that equipment has no flaws. It means no reportable indication was found by that method, under that procedure, in the area examined. Areas not examined were not proven sound. Flaws the method cannot detect were not ruled out.
NDT also does not decide fitness for service by itself. It produces findings and measurements. Judging what a finding means for continued operation, calculating remaining life, and accepting equipment back into service belong to the engineers, the Level III, and, where the code requires one, the authorized inspector. SpecNDT does not do those jobs either. Software that claims to replace them should be read carefully.
Why the test is only half the result
An NDT report becomes valuable when a later reader can answer three questions from it. Who performed the test, and were they qualified for that method on that day. Which procedure revision governed the examination. Which asset the result belongs to, and what happened after a finding.
If any of the three has to be reconstructed from memory, a shared drive, or a filename, the result has already lost value. That loss rarely happens in the field. The technician did the test. It happens in the records, slowly, as certificates lapse, procedures are superseded, and reports are filed by the year they were scanned instead of by the asset they describe.
This is also what an auditor asks to see when they walk an NDT program. Auditors rarely ask a team to perform a test in the room. They ask the team to show the qualification, the procedure revision, and the asset history as one trail.
Why NDT teams need compliance software
A small team with one crew can keep this straight with a careful person and a spreadsheet. Oil and gas NDT rarely stays that small. Crews rotate, contractors mobilize for a turnaround and leave, one technician holds three methods on three different expiry dates, and a client specification changes which scheme the next job requires. The spreadsheet does not fail loudly. A date passes, a superseded procedure stays on the truck, and the team finds out when a client asks for the package.
Strong NDT compliance software is the system that keeps the trail current while the work is happening. For an NDT program, that means at least these things:
- One row per qualification, with scheme, method, level, expiry, and vision dates as fields the team can sort, so who is current today is a list and not a research project.
- Procedure control that names the revision in force and keeps superseded revisions readable as history, so an inspection can point at the procedure that applied that day.
- Inspection history tied to the asset, the procedure revision, and the technician, so a finding stays with the equipment the next inspector will open.
- A list of what is overdue or about to lapse, visible before a client or an auditor asks for it.
What the software should not do is just as specific. It should not certify technicians, accept a central certificate for a job, or decide whether equipment is fit to run. Those decisions stay with the employer, the Level III, and the authorized inspector. The software keeps the evidence for the decision current and showable. That state, held on an ordinary week and not rebuilt for a visit, is what audit-ready means.
SpecNDT is built for that job in oil and gas. It holds certifications, procedure revisions, and inspection history on one trail, so the team can show who was qualified, which procedure applied, and which asset the report belongs to.
Common questions about NDT
Does NDT damage the equipment it tests?
No. Leaving the equipment usable is the definition of the work. Some methods need surface preparation, coatings removed in the test area, or access arranged, and radiography needs a controlled area while it is performed. The part itself is not cut, drilled, or broken by the test.
What is the difference between NDT and destructive testing?
Destructive testing breaks a sample to learn how the material behaves, including tensile strength and toughness. NDT examines the actual equipment and leaves it in service. The two answer different questions. A program proving a material or a welding procedure may need destructive tests on samples. A program inspecting installed equipment needs NDT.
How long does an NDT certification last?
There is no single interval this article can give you. The written practice or the certifying scheme sets the period, and it differs by scheme, method, and client specification. Vision testing is usually on a shorter interval of its own. What a team can control is whether the date is a field it checks, instead of a sentence inside a certificate it filed.
What should NDT compliance software keep?
The qualification behind each test, the procedure revision that governed it, and the inspection history on the asset, with the dates your written practice cares about. If the software cannot show those three together for a named inspection, it is a filing cabinet with better colors.
If the records behind your team's testing live in folders and spreadsheets, request access and tell us about the team. If you already have access, Login opens the application. This site does not.